Paper Dapple
SearchSaved

PRINT TRAY

Your exact files

Your selected public edition identities stay in this browser until you remove them. Changed files are never silently replaced.

Build this packet

Drawing & decoration

Winter Warmth layered paper scene

Snowflake and house drawings mark the winter-warmth rear layer. Cut its outside contour and fold the bottom tab.

US Letter · 5 PDF pages · Print PDF

Go to download

All 5 pages available to preview

Page 1 of 5

Preview of the actual PDF. Open complete PDF

READY TO PRINT

Download this printable.

Paper
US Letter
Pages
5
File
Print PDF
Download PDF
Other designs or file types
Complete file list

Free · 44 KB · No account needed

For covered files: personal, classroom, noncommercial community and your own internal business records. Resale or a product incorporating a design needs separate permission. Read full use permissions.

See what is on each page
  • Page 1 — Back layer / 160 mm / Front-fold tab
  • Page 2 — Middle main layer + separate flame / scrap backer
  • Page 3 — Front main layer + separate flame / scrap backer
  • Page 4 — 176 x 120 mm base / 95, 60, 25 mm axes
  • Page 5 — Instructions + 1:1 reverse placement guides / keep intact

Enter these page numbers in your PDF viewer’s print range. Keep any instructions, matching answers and required project pieces.

Save or prepare these pages

Something wrong with the print?

Check the specific problem, then return to this selected PDF.

Back to the selected file · Report a problem with this printable

Winter Warmth layered paper scene / LETTER - assembly guidance revised

Revision history and earlier files

Revised editions available

Revised assembly guidance resolves the separate flames and tab direction using the unchanged original geometry.

Winter Warmth layered paper scene / LETTER - assembly guidance revised; Winter Warmth layered paper scene / A4 - assembly guidance revised

Earlier files remain in the edition choices. Saved Print Tray recipes keep their exact original files.

Every earlier exact file link remains available in the complete file list.

A good fit for your idea?

Letter and A4 preserve the component dimensions. Choose the sheet you will print, not a different object size.

Materials and construction

Plain paper for a first trial, a ruler, scissors and a blunt scoring tool; adult help for internal cuts.

Before making a batch

Confirm the reference bar and stated panel sizes.

Check the actual small details and, for folded pieces, the fold alignment and unsupported edges.

Printing, file details and help

About this file

Answer pages
None supplied in this edition
Instruction pages
1
Orientation
Portrait

Three 160 mm layer assemblies with 12 mm tabs; the middle and front flames are separate original cut pieces joined with two user-supplied 3 x 15 mm backers.

176 x 120 mm base; illustrations face Front, with tabs folded toward Front on the 95, 60 and 25 mm axes. Supports remain visible through the flame gaps and beside the narrowing tips.

A three-layer paper display retaining the original silhouettes, with separate middle and front flames joined using measured scrap supports.

Five pages include four original construction sheets and exact reverse placement guides on the instruction page. The narrow supports remain visible in the flame gaps and beside the tips.

From file to finished page

  1. Print all five US Letter (8.5 x 11 inches) pages at 100% / actual size on matching paper. Check the 50 mm bar; keep the page 5 placement guides intact.
  2. Cut the three main layers and two separate flames around their outer contours; retain all interior drawing lines and bottom tabs.
  3. Follow the intact page 5 reverse guides, keeping printed parts down and their tops up. Use two 3 x 15 mm scrap supports with end adhesive windows and dry middles.
  4. Illustrations face Front. Fold each 12 mm tab toward Front, printed side up. Glue blank undersides to the marked bands with creases on the 95, 60 and 25 mm axes.
Printing and use notes

Two measured scrap backers and paper adhesive are required. Original patterns contain five cut parts, joined into three layer assemblies.

Supports remain visible. Digital geometry checks do not establish material strength, adhesive behavior or a finished physical result.

Direct PDF files by design
Winter Warmth layered paper scene (4 files)
  • US Letter — print PDF · 5 pages
    Page numbers and contents
    • Page 1 — layer 1 connected cut boundary; Snowflake drawing; House drawing
    • Page 2 — layer 2 connected cut boundary; Mitten layer drawing; Snowflake layer drawing; Candle layer drawing
    • Page 3 — layer 3 connected cut boundary; Snowflake layer drawing; Candle layer drawing; House layer drawing
    • Page 4 — 176 x 120 mm base
    • Page 5 — Assembly instructions
  • A4 — print PDF · 5 pages
    Page numbers and contents
    • Page 1 — layer 1 connected cut boundary; Snowflake drawing; House drawing
    • Page 2 — layer 2 connected cut boundary; Mitten layer drawing; Snowflake layer drawing; Candle layer drawing
    • Page 3 — layer 3 connected cut boundary; Snowflake layer drawing; Candle layer drawing; House layer drawing
    • Page 4 — 176 x 120 mm base
    • Page 5 — Assembly instructions
  • US Letter — print PDF · 5 pages
    Page numbers and contents
    • Page 1 — Back layer / 160 mm / Front-fold tab
    • Page 2 — Middle main layer + separate flame / scrap backer
    • Page 3 — Front main layer + separate flame / scrap backer
    • Page 4 — 176 x 120 mm base / 95, 60, 25 mm axes
    • Page 5 — Instructions + 1:1 reverse placement guides / keep intact
  • A4 — print PDF · 5 pages
    Page numbers and contents
    • Page 1 — Back layer / 160 mm / Front-fold tab
    • Page 2 — Middle main layer + separate flame / scrap backer
    • Page 3 — Front main layer + separate flame / scrap backer
    • Page 4 — 176 x 120 mm base / 95, 60, 25 mm axes
    • Page 5 — Instructions + 1:1 reverse placement guides / keep intact

Use permissions · Return to selected file

Winter Warmth layered paper scene

Open complete PDF