Paper crafts
Cone paper model
A cone shell with 48 mm larger diameter and 65 mm nominal vertical height. Separate circular end pieces are optional.
US Letter · 2 PDF pages · Print PDF
Go to downloadAll 2 pages available to preview
Preview of the actual PDF. Open complete PDF
See the page overview
READY TO PRINT
Download this printable.
- Paper
- US Letter
- Pages
- 2
- File
- Print PDF
Free · 32 KB · No account needed
Print at actual size (100%) on the matching paper. Measure the 50 mm reference line on a physical trial; a screen ruler is not a print check.
See what is on each page
- Page 1 — Curved surface / separate optional base pieces
- Page 2 — Assembly instructions
Enter these page numbers in your PDF viewer’s print range. Keep any instructions, matching answers and required project pieces.
Save or prepare these pages
Optional: Studio makes a separate page using this design family and paper size. It does not edit this PDF. Preview every sheet before exporting.
Something wrong with the print?
Check the specific problem, then return to this selected PDF.
Back to the selected file · Report a problem with this printable
Cone paper model / LETTER
A good fit for your idea?
Match the joining instructions to the shape. The result is a learning or display model, not tested protective packaging.
Printing, file details and help
About this file
- Instruction pages
- 1
A cone shell with 48 mm larger diameter and 65 mm nominal vertical height. Separate circular end pieces are optional.
From file to finished page
- Choose the paper size loaded in your printer and open the matching PDF.
- Print at actual size (100%) on the matching paper. Measure the 50 mm reference line on a physical trial; a screen ruler is not a print check.
- Cut the curved surface along its solid perimeter. Do not add an overlap or cut away a sector: its arc lengths define the stated diameters.
- Curve the surface gently. Bring the two straight radial edges together edge-to-edge, with no overlap, then bridge the seam using narrow tape.
- Add an optional circular end by attaching short tape pieces at opposite points first. Work evenly around the circumference rather than forcing one long strip around it.
- Check the model on scrap before using decorative stock. The flat pattern establishes nominal geometry, not a guaranteed assembled interior size.
Printing and use notes
This is a paper learning/display model. It is not a fitted, protective, food-contact or load-bearing container.
Paper thickness, actual folding and taped joins have not been physically tested.
Direct PDF files by design
Cone paper model (2 files)
- US Letter — print PDF · 2 pages
Page numbers and contents
- Page 1 — Curved surface / separate optional base pieces
- Page 2 — Assembly instructions
- A4 — print PDF · 2 pages
Page numbers and contents
- Page 1 — Curved surface / separate optional base pieces
- Page 2 — Assembly instructions