Gifts & celebrations
Divided paper tray patterns
Build a four- or six-compartment paper tray from its matching base, liner and half-slot dividers. Select an edition for the actual footprint, dimensions and supplied pieces.
US Letter · 3 PDF pages · Print PDF
Go to download2 preview images · 3 PDF pages. Open the complete PDF for every page.
Preview of the actual PDF. Open complete PDF
See the page overview
READY TO PRINT
Download this printable.
- Paper
- US Letter
- Pages
- 3
- File
- Print PDF
Free · 43 KB · No account needed
Print the matching paper edition at actual size (100%). Measure the printed 50 mm line before cutting. The screen preview is not a measurement test.
See what is on each page
- Page 1 — base net
- Page 2 — liner; long divider; cross divider
- Page 3 — Assembly instructions
Enter these page numbers in your PDF viewer’s print range. Keep any instructions, matching answers and required project pieces.
Save or prepare these pages
Optional: Studio makes a separate page using this design family and paper size. It does not edit this PDF. Preview every sheet before exporting.
Something wrong with the print?
Check the specific problem, then return to this selected PDF.
Back to the selected file · Report a problem with this printable
Four-compartment keepsake tray / LETTER
A good fit for your idea?
Choose the exact edition first. Its preview, pieces, paper size and instructions belong together; no physical fit or assembly approval is implied.
Choose four or six compartments
The four-compartment and six-compartment patterns have different bases and divider lengths. Select one complete edition and keep its tray, liner and dividers together.
The slots meet halfway through the divider height. Try the exact stock in a spare slot before assembling the grid; a nominal slot width is not a guarantee that a laminated or folded sheet will fit.
Printing, file details and help
About this file
- Instruction pages
- 1
A 84 x 64 mm base tray with 26 mm walls and an interlocking 2 x 2 divider grid.
From file to finished page
- Choose the paper size loaded in your printer and open the matching PDF.
- Print the matching paper edition at actual size (100%). Measure the printed 50 mm line before cutting. The screen preview is not a measurement test.
- Cut the tray, liner and all labeled divider strips. Keep the corner tabs; cut the divider notches only within their narrow marked slots.
- Crease the base and corner hinges, raise the walls, and glue each corner tab behind its adjacent wall. Add the liner after the tabs have set.
- Hold the long divider with its slots facing upward. Hold the cross dividers with their slots facing downward, then slide each pair together halfway.
- The slot width is 0.8 mm and the nominal divider thickness allowance is 0.8 mm. Test actual card thickness; do not force a thick sheet into a narrow slot.
- Place the assembled grid inside the dry tray. The dividers are 1 mm shorter than the nominal interior span, which is a trial fit allowance, not verified clearance.
Printing and use notes
The dimensions describe the flat pattern and fold lines, not guaranteed internal capacity.
Physical printing, fit and assembly have not been tested. Make a scrap-paper trial before using special stock.
This is a decorative or organizational paper project, not protective shipping packaging, food-contact material or a load-rated container.
Direct PDF files by design
Four-compartment keepsake tray (2 files)
- US Letter — print PDF · 3 pages
Page numbers and contents
- Page 1 — base net
- Page 2 — liner; long divider; cross divider
- Page 3 — Assembly instructions
- A4 — print PDF · 3 pages
Page numbers and contents
- Page 1 — base net
- Page 2 — liner; long divider; cross divider
- Page 3 — Assembly instructions
Six-compartment sample tray (2 files)
- US Letter — print PDF · 3 pages
Page numbers and contents
- Page 1 — base net
- Page 2 — liner; long divider; cross divider (2 pieces)
- Page 3 — Assembly instructions
- A4 — print PDF · 3 pages
Page numbers and contents
- Page 1 — base net
- Page 2 — liner; long divider; cross divider (2 pieces)
- Page 3 — Assembly instructions