Paper crafts
Easel greeting card base
Build an easel-style card base that presents a front panel at an angle. Read the support instructions before deciding where decoration and messages will sit.
US Letter · 2 PDF pages · Print PDF
Go to downloadAll 2 pages available to preview
Preview of the actual PDF. Open complete PDF
See the page overview
READY TO PRINT
Download this printable.
- Paper
- US Letter
- Pages
- 2
- File
- Print PDF
Free · 33 KB · No account needed
Print at actual size (100%) on the matching paper. Measure the 50 mm reference line on a physical trial; a screen ruler is not a print check.
See what is on each page
- Page 1 — easel card base; display face; stopper
- Page 2 — Assembly instructions
Enter these page numbers in your PDF viewer’s print range. Keep any instructions, matching answers and required project pieces.
Save or prepare these pages
Optional: Studio makes a separate page using this design family and paper size. It does not edit this PDF. Preview every sheet before exporting.
Something wrong with the print?
Check the specific problem, then return to this selected PDF.
Back to the selected file · Report a problem with this printable
Easel greeting card base / LETTER
A good fit for your idea?
This is a paper display construction, not a tested stand for heavy objects.
Check the support under real conditions
Paper stiffness and the surface beneath the card affect stability. Test the chosen stock with the planned decoration rather than assuming an unweighted paper trial will support heavier additions.
Printing, file details and help
About this file
- Instruction pages
- 1
A 180 x 90 mm easel base with panel widths 90, 45, 45 mm.
From file to finished page
- Choose the paper size loaded in your printer and open the matching PDF.
- Print at actual size (100%) on the matching paper. Measure the 50 mm reference line on a physical trial; a screen ruler is not a print check.
- Cut around the outer rectangle. Score only the dashed fold lines before decorating the blank panels.
- Fold the 90 mm base under the two 45 mm support panels. Crease the second fold so the outer panel angles upward.
- Attach the separate 90 x 65 mm display face to the outer MOUNT panel only, aligning its lower edge to that panel.
- Glue the small stopper onto the base after testing the display angle. The display edge rests behind it; do not glue the hinge shut.
- Check the finished folds on scrap first. These dimensions do not establish compatibility with a commercial card or envelope size.
Printing and use notes
Make a scrap-paper trial before using special material or producing a batch.
Digital geometry does not establish physical assembly, durable joins, material fit or compatibility with a particular product.
Direct PDF files by design
Easel greeting card base (2 files)
- US Letter — print PDF · 2 pages
Page numbers and contents
- Page 1 — easel card base; display face; stopper
- Page 2 — Assembly instructions
- A4 — print PDF · 2 pages
Page numbers and contents
- Page 1 — easel card base; display face; stopper
- Page 2 — Assembly instructions