Paper crafts
Rotating message-reveal wheel
A 140 mm six-sector message wheel and 130 mm cover with one matching curved window.
Paper crafts
Spinning-window message card
A rotating six-sector message wheel behind a circular mask, with an exposed rim and a single viewing window.
Previews show up to the first two pages. Download the PDF for every page listed in its contents.
Page 1 of 2
Preview of the actual PDF. Open the PDF
MAKE IT WORK FOR YOU
Your printable.
All exact editions
- Paper
- US Letter
- Pages
- 2
- Sheet
- 215.9 × 279.4 mm
- Format
- Print PDF
Free · 40 KB · No account needed
Print the matching paper edition at actual size (100%). Measure the printed 50 mm line before cutting. The screen preview is not a measurement test.
Pages in this PDF
- Page 1 — REAR WHEEL; FRONT MASK; VIEWING WINDOW
- Page 2 — Assembly instructions
Enter these page numbers in your PDF viewer’s print range. Keep any instructions, matching answers and required project pieces.
Studio opens its own editable layout. Check its preview before downloading.
Spinning-window message card / LETTER
A good fit for your idea?
Choose the exact edition first. Its preview, pieces, paper size and instructions belong together; no physical fit or assembly approval is implied.
Write inside the visible ring
The rear wheel is divided into six sectors and the mask reveals a smaller angular window. Keep short messages inside the printed ring rather than near the center pivot.
Tightening a fastener can prevent rotation, while making an oversized hole can introduce unwanted movement. Compare the chosen fastener with the printed hole before assembling.
Inside this edition
- Instruction pages
- 1
A rotating six-sector message wheel behind a circular mask, with an exposed rim and a single viewing window.
From file to finished page
- Choose the paper size loaded in your printer and open the matching PDF.
- Print the matching paper edition at actual size (100%). Measure the printed 50 mm line before cutting. The screen preview is not a measurement test.
- Cut the two circles, retaining their center marks. Remove only the annular-sector window from the front mask.
- Write one short item in each of the six numbered sectors on the rear disk. Keep text inside the visible ring between the printed guide circles.
- Make the two center holes using a suitable supervised tool. Join the disks with a small paper fastener, leaving enough clearance for rotation.
- Keep the mask in front and rotate the larger rear rim. Align each sector with the window before reading it.
- Keep loose fasteners away from young children. This is a manually rotated paper display, not a clock or calibrated selection device.
Printing and use notes
The dimensions describe the flat pattern and fold lines, not guaranteed internal capacity.
Physical printing, fit and assembly have not been tested. Make a scrap-paper trial before using special stock.
This is a decorative or organizational paper project, not protective shipping packaging, food-contact material or a load-rated container.
Direct PDF files for every edition
- Spinning-window message card / LETTER · 2 pages
Page numbers and contents
- Page 1 — REAR WHEEL; FRONT MASK; VIEWING WINDOW
- Page 2 — Assembly instructions
- Spinning-window message card / A4 · 2 pages
Page numbers and contents
- Page 1 — REAR WHEEL; FRONT MASK; VIEWING WINDOW
- Page 2 — Assembly instructions
KEEP THE IDEA GOING
A few more possibilities.
Paper crafts
Slider message card
A 104 x 76 mm reveal card with a 64 x 22 mm window, two internal rails and a sliding message strip.
Paper crafts
Bridge-fold greeting card base
Assemble a bridge-fold card using the supplied folded base and front joining strip. The bridge is a separate construction piece, not merely a printed band.